Milling cutters/end mills are broadly divided into:
1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing;
2. Ball end milling cutter/end mill: semi-finishing and finishing of curved surface; the small blade can finish milling small chamfer of steep surface/straight wall.
3, Radius end mill: rough milling when the surface change is small, the small concave area is less, and in relatively flat area.
4. Taper end mills: with chamfer, it can be used for rough milling to remove a large number of blanks, and it can also be fine-milled with a small chamfer on the flat surface (relative to the steep surface).
5. Dill
6. Thread mill
7. Formed cutter
Speciafication and Feature
1. Self feeding screw point provides fast boring in hard and soft woods, for precise and easy drilling.
2. Solid center design provide extre rigidity and excellent chip-carrying capacity.
3. Wide lands keep the bit straight as it bore through the hole.
4. Strict standard for consistent quality assurance.
Specifications
HRC60 Tungsten carbide end mill
Blade diameter from 1mm-20mm, helix angle 35°, hardness 62, suitable for high speed; Features: micro-particle cemented carbide material, WC=87.5%, CO=12.5%, TRC>5000N/m2, particle size: 0.3- 0.4um, can process carbon steel, alloy steel,Stainess steel
2 flute ball carbide end mill
| Type | Blade diameter | Blade length | Shank diameter | Total length |
| R0.75×3×4D×50L×2F | 1.5 | 3 | 4 | 50 |
| R1.0×4×4D×50L×2F | 2 | 4 | 4 | 50 |
| R1.25×5×4D×50L×2F | 2.5 | 5 | 4 | 50 |
| R1.5×6×4D×50L×2F | 3 | 6 | 4 | 50 |
| R1.75×7×4D×50L×2F | 3.5 | 7 | 4 | 50 |
| R2.0×8×4D×50L×2F | 4 | 8 | 4 | 50 |
| R2.5×10×6D×50L×2F | 5 | 10 | 6 | 50 |
| R3.0×12×6D×50L×2F | 6 | 12 | 6 | 50 |
| R3.5×14×8D×60L×2F | 7 | 14 | 8 | 60 |
| R4.0×16×8D×60L×2F | 8 | 16 | 8 | 60 |
| R4.5×18×10D×75L×2F | 9 | 18 | 10 | 75 |
| R5.0×20×10D×75L×2F | 10 | 20 | 10 | 75 |
| R5.5×22×12D×75L×2F | 11 | 22 | 12 | 75 |
| R6.0×24×12D×75L×2F | 12 | 24 | 12 | 75 |
| R7.0×28×14D×100L×2F | 14 | 28 | 14 | 100 |
| R8.0×32×16D×100L×2F | 16 | 32 | 16 | 100 |
| R9.0×36×18D×100L×2F | 18 | 36 | 18 | 100 |
| R10×40×20D×100L×2F | 20 | 40 | 20 | 100 |
4 flute ball carbide end mill
| Type | Blade diameter | Blade length | Shank diameter | Total length |
| R0.75×3×4D×50L×2F | 1.5 | 3 | 4 | 50 |
| R1.0×4×4D×50L×2F | 2 | 4 | 4 | 50 |
| R1.25×5×4D×50L×2F | 2.5 | 5 | 4 | 50 |
| R1.5×6×4D×50L×2F | 3 | 6 | 4 | 50 |
| R1.75×7×4D×50L×2F | 3.5 | 7 | 4 | 50 |
| R2.0×8×4D×50L×2F | 4 | 8 | 4 | 50 |
| R2.5×10×6D×50L×2F | 5 | 10 | 6 | 50 |
| R3.0×12×6D×50L×2F | 6 | 12 | 6 | 50 |
| R3.5×14×8D×60L×2F | 7 | 14 | 8 | 60 |
| R4.0×16×8D×60L×2F | 8 | 16 | 8 | 60 |
| R4.5×18×10D×75L×2F | 9 | 18 | 10 | 75 |
| R5.0×20×10D×75L×2F | 10 | 20 | 10 | 75 |
| R5.5×22×12D×75L×2F | 11 | 22 | 12 | 75 |
| R6.0×24×12D×75L×2F | 12 | 24 | 12 | 75 |
| R7.0×28×14D×100L×2F | 14 | 28 | 14 | 100 |
| R8.0×32×16D×100L×2F | 16 | 32 | 16 | 100 |
| R9.0×36×18D×100L×2F | 18 | 36 | 18 | 100 |
| R10×40×20D×100L×2F | 20 | 40 | 20 | 100 |
Applications
1. Suitable for Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc.
2. Applicated for Aerospace, transportation, Medical equipment, military manufacturing, mould development, apparatus and instrument, etc
Product Tags:
|
|
Wear Resistance Tungsten Carbide End Mill With Excellent Workpiece Finishes Images
|
